Tag Archives: Membrane Biorreactor

Learn More About The Membrane Bioreactor

Membrane bioreactor technology is one of the most commonly used methods of separation used in industries. The process of sewage cleaning is very intensive. Membrane bioreactor is normally used in the secondary process of treatment of sewage. The membrane itself is semi-permeable thus separates substances depending on their sizes. It works in a very detailed process. This is one of the most recent acquired techniques used in purification of liquids.
The semi-permeable membrane acts as a filter. When water is allowed to pass through it, it catches some solid substances and other particles while allowing the liquid part to go through. The solid substances are the materials which are not required. It makes the liquid dirty. When the particles are being separated from the liquid, the liquid becomes purified. The membrane permits some substance while others are being held-up.

In this kind of process, no chemical is used to filter out the solid substances. There are other methods of enabling substances to penetrate through membranes. Examples of these methods are the use of high pressure, concentration gradient maintenance on the sides of the membranes and the use of an electric potential. Membrane bioreactor depends on the rate of absorption and retention capacity. The membrane technology can operate at higher concentration of solids in inside the bioreactor compared to that of a sludge plant. The high concentration allows the extraction of dissolved organic wastes and other solid substances.

The process is capable of dealing with major industrial wastses especially where there is scarcity of water. In the membrane technology, two steps are involved. In the bioreactor aerobic bacteria takes in the materials organic in nature. This takes place while dissolved oxygen is present and a membrane where clean or pure water get separated from the organic substances and other solid wastes. Inside the bioreactor there is separation of the membranes to allow the required flow of air. This will help the penetration of the liquid through the membranes.

There are different shapes of membranes. The one with rectangular sheets, flat sheets and circular shaped. Most of the membranes need a lot of exerted pressure to permit penetration. A vacuum can be used to exert the pressure. A lot of suspended solids can be removed by the use of membrane bioreactor. It has helped to purify municipal wastes easily making a clean compound out of it. The water which comes as a result of purification can be used once more. There will be no more wastage of water.

The membrane bioreactor has created a lot of trust due to its performance. Waste water treatment has been made easy. Some large companies have acquired the membrane bioreactor equipment to conduct the business of waste water purification. This kind of technique has just been innovated recently. In the past other methods were used. Its usage is gaining grounds although the cost of acquiring the equipment is quite high. Many companies in the world have started to enter into the business of membrane bioreactor separation of liquids.